Hard water’s quiet expenses add up faster than most folks realize. Elevated heating bills, laundry that never quite feels clean, faucet aerators that slow to a trickle—these aren’t isolated annoyances; they’re symptoms of mineral-laden water attacking your home every day. Across the Midwest and Mountain West, I routinely see water hardness levels between 12 and 20 GPG lead to an extra service call or replacement every single year—water heater flushes, new showerheads, dishwasher elements—you name it. And none of that includes the hours lost to scrubbing “impossible-to-rinse” bathroom residue.
Meet the Okoye family—Arturo (39), an aircraft mechanic, and his wife Lina (37), a school counselor—who recently moved just outside Olathe, Kansas, onto a private well. Their water test showed 18 GPG hardness plus 0.8 PPM iron. After trying an electronic descaler that didn’t help and a bargain time-clock softener that churned through salt, they were stuck replacing showerheads twice in 14 months and paying for a dishwasher repair when the heating element scaled over. Their kids, Mateo (9) and Ava (6), struggled with itchy skin after baths. By the time we spoke, they were ready for a whole-house fix that was efficient, trustworthy, and proven.
This list is for families like the Okoyes who want one system to end the cycle—less salt, less water waste, better flow, and real support when you need it. Below you’ll discover why the SoftPro Elite Water Softener consistently rises to the top: its counter-current cleaning approach, smart metering, high-performance resin, emergency reserve, strong flow, and lifetime protection that make living with hard water simpler and more affordable. I’ll cover system sizing, DIY installation realities, maintenance best practices, and targeted competitor comparisons so you can make a confident, informed decision.
Here’s what we’ll unpack:
- How counter-current cleaning slashes salt and water waste Why smart metering beats timer-based regeneration Flow rates that protect pressure during peak demand Capacity choices that actually match your hardness and household size Iron handling up to 3 PPM and what that means for wells Vacation mode and diagnostics that keep things reliable Warranty and family-owned support you can reach when it matters Clear ROI math that shows payback in a few short years
Let’s get specific.
#1. Counter-Current Cleaning Efficiency – Upflow Regeneration, Salt Savings, and Smarter Brine Use
Hard water doesn’t just coat surfaces; it loads your softener’s resin with calcium and magnesium. How that resin is cleaned determines how much salt and water you’ll buy for the next decade.
- In the SoftPro Elite, upflow regeneration sends the brine upward through the resin bed during the cleaning cycle. Moving opposite the normal service direction expands the bed and slows the brine’s passage through the resin beads, which dramatically improves contact time. In practice, that means the brine solution is used more completely—over 90% utilization in many homes—so you need fewer pounds of salt per cycle. Traditional downflow systems often consume 6–15 lbs of salt per regeneration and waste 50–80 gallons of rinse water. The Elite’s counter-current approach commonly trims that to roughly 2–4 lbs per cycle with rinse volumes in the 18–30 gallon range. Result: fewer refills and far less water down the drain without sacrificing performance. The 8% crosslink resin in SoftPro Elite provides the ideal balance of capacity and durability. When the upflow cycle expands the bed, trapped particles and clear-water iron are purged more thoroughly—key for private wells like the Okoyes’.
For the Okoyes, moving from a time-clock softener to the Elite cut their salt use to a fraction of what they were hauling before. Within three weeks, Lina noticed her brine tank level dropping more slowly, and the kids’ bath time stopped ending in scratchy skin.
How the Upward Brine Path Improves Every Clean
Counter-current brine flow pushes from the bottom distributor upward, fluidizing the resin. This bed expansion dislodges trapped fines and iron while exposing more exchange sites to fresh brine. You get stronger, best softener system more even cleaning across the resin column.
Real Salt Numbers, Real Savings
When a system regenerates with 2–4 lbs of salt instead of 6–15 lbs, annual salt expense typically drops by hundreds of pounds. Factor in rinse water reductions, and total operating costs fall significantly.
Resin Longevity from Better Cleaning
Thorough brine contact prevents channeling and keeps your resin beads from fouling prematurely. Expect 15–20 years out of SoftPro’s resin versus the 7–10 years I often see from lower-grade media.
Key Takeaway
Cleaner resin with less salt and water—it’s the foundation of why SoftPro Elite stays efficient for the long haul.
#2. Demand-Initiated Intelligence – Metered Valve, Real-Time Usage, and No More Guesswork
The smartest softeners don’t run on a calendar; they respond to your actual water use. The Elite’s demand-initiated metered valve tracks gallons consumed and regenerates only when needed—ending the wasteful “every X days” schedule that never matches real life.
- A smart valve controller with a 4-line LCD and backlit touchpad lets you set hardness precisely and view gallons remaining before the next regeneration. That means shorter cycles, minimal reserve, and no running out of soft water on a busy laundry day. The system logs “days since last regeneration” and monitors patterns so the resin is used fully, then refreshed on cue. This is especially useful for fluctuating schedules—travel, sports tournaments, or a week of houseguests. And for households on private wells with iron, the Elite’s cycle logic pairs perfectly with its fine mesh media to maintain capacity without overusing salt.
For Arturo and Lina, the metered regeneration stopped the midnight cycles they used to hear from the basement—cycles that always seemed to hit after a low-use day. Now the Elite cleans when the meter says it’s time, not when a timer blindly decides.
Comparison Focus: SoftPro Elite vs. Fleck 5600SXT (Efficiency and Control)
The Fleck 5600SXT is a respected workhorse, but most installations rely on traditional downflow cleaning and larger reserves (often 30%+). Salt usage on downflow units typically lands in the 6–15 lb range per cycle with higher rinse water volumes. By contrast, the Elite’s upflow design pairs with a metered valve and a lean ~15% reserve, so you’re not throwing salt and water at a schedule that doesn’t fit your home. Programming on the Elite’s LCD touchpad is straightforward—hardness, time, and reserve logic—while diagnostic screens help identify flow, errors, and capacity remaining at a glance. In the Okoye home, the difference was immediate: salt bags lasted longer, cycles happened less frequently, and the tank no longer “ate” salt during low-use weeks. Over five years, the operating savings and convenience stack up—making the SoftPro Elite worth every single penny.
How Metering Cuts Regens in Half
If your family uses 350–450 gallons daily, the meter optimizes cycles so the resin is nearly spent—but not exhausted—before cleaning. Fewer cycles = less salt and water.
Diagnostics That Speak Your Language
Error codes and on-screen analytics help you (and my team at Quality Water Treatment) solve small issues fast. No cryptic beeps, no mystery settings.
Key Takeaway
When your softener listens to your water use, everything becomes simpler—lower cost, fewer interruptions, better consistency.
#3. Pressure You Can Feel – 15 GPM Flow Rate, Peak Demand, and Even Whole-Home Coverage
“Will a softener choke my showers?” Not with the SoftPro Elite. It’s designed to support a strong flow rate (15 GPM) so multiple fixtures can run without flattening pressure.
- The Elite’s internal pathing and valve design maintain a low pressure drop (often just 3–5 PSI across the system during service). That preserves the “feel” of your home’s plumbing, even when bathrooms, the kitchen, and laundry run together. For larger households or those with body sprays and rain heads, this headroom matters. I’ve seen undersized or restrictive softeners turn morning routines into a water fight. Not here. Pairing the Elite with 1" plumbing and proper bypass sizing ensures your distribution loop gets what it needs, and your water heater gets protection without a performance penalty.
The Okoyes have two full baths and a busy kitchen. Even on laundry Saturdays, their showers didn’t “go weak” post-install. If anything, removing mineral buildup in aerators improved sink flow over several weeks.
Why Internal Valve Design Matters
Valve internals, distributor size, and bypass valve geometry set the ceiling for system flow. The Elite’s full-port approach minimizes restriction.
Peak Demand Planning
If you regularly run 3–4 fixtures at once, 15 GPM service flow with 18 GPM peak tolerance covers you. This is not a place to cut corners.
Key Takeaway
You get whole-home soft water and strong delivery—no compromise on pressure.
#4. Right Size, Right Results – Grain Capacity Options and Real Sizing Math That Works
The right capacity keeps regeneration intervals in the sweet spot—typically every 3–7 days. Too small, and you regenerate constantly; too large, and you tie up cash and space you don’t need.
- The Elite lineup covers 32K, 48K, 64K, 80K, and 110K grain capacities. Using a reliable formula—People × 75 gallons/day × GPG—you can size precisely. Example: The Okoyes (4 people) use roughly 300 gallons/day at 18 GPG = 5,400 grains/day. A 48K unit would regenerate every 8–9 days; a 64K tightens that to every 6–7 days while preserving headroom for iron and guests. We chose the 64K with fine mesh media to manage both hardness and 0.8 PPM iron. Proper sizing also ensures the Elite’s reserve capacity stays around 15% instead of the 30–35% many downflow systems require. That alone makes a real dent in salt expense.
When to Choose Each Capacity
- 32K: 1–2 people at 7–10 GPG 48K: 3–4 people at 11–15 GPG 64K: 4–5 people at 15–20 GPG or wells with iron 80K–110K: 5–6+ people with high hardness (20+ GPG) or large homes
Regeneration Frequency Targets
Aim for every 3–7 days. More frequent usually equals wasted salt; less frequent can risk resin fouling with iron.
Key Takeaway
Capacity that fits your home equals consistent soft water, lower costs, and longer resin life.
#5. Fine Mesh Resin and Iron Handling – Up to 3 PPM Iron Capacity, Cleaner Resin, Fewer Stains
Not all resin is the same. SoftPro’s fine mesh resin offers a smaller bead size and higher surface area, which improves capture of hardness minerals and low-level iron.
- With iron up to 3 PPM (clear water iron), the Elite maintains performance without a separate iron filter in many cases. The combination of fine mesh and upflow cleaning removes trapped iron before it cements into the bed. If you see orange staining, metallic taste, or brown water bursts, test your iron. For levels over 3 PPM, add a dedicated iron system ahead of the softener for best results. The Elite’s thorough backwash cycle and brine draw help purge iron and fines, protecting exchange sites for years.
The Okoyes’ well water had sporadic orange staining at fixtures. After installing the Elite with fine mesh and programming a slightly stronger brine dose, stains faded within weeks and haven’t returned.
Comparison Focus: SoftPro Elite vs. SpringWell SS1 (Reserve and Flexibility)
The SpringWell SS1 is a recognizable brand in this space. It often uses standard reserve assumptions (around 30%) and downflow regeneration, which drives higher salt use per cycle and longer rinse stages. SoftPro’s fine mesh and upflow pairing enable leaner brine dosing and a tighter ~15% reserve without sacrificing clear-water iron handling up to 3 PPM. For private wells like the Okoyes’, that means fewer trips to the salt pallet and more consistent capacity, even when iron spikes appear seasonally. Programming flexibility on the Elite’s controller also gives you room to adjust brine draw or cycle timing if your iron load changes—a level of control the Okoyes appreciated after prior “black box” experiences. Over time, less salt, fewer regens, and adjustable control windows made the Elite not only easier to live with, but worth every single penny.
How Fine Mesh Captures More
Smaller beads (~0.3–0.5 mm) provide more surface area and tighter packing density. That means better contact with passing water and improved capture of iron and hardness.
Preventing Iron Cementing
Counter-current cleaning shears iron before it lodges permanently in resin pores. That’s the difference between a 5-year resin change and a 15–20 year run.
Key Takeaway
If you’ve got low-level iron, pairing fine mesh with upflow cleaning is the smartest path to spotless fixtures.
#6. Emergency Reserve and Quick Regen – 15-Minute Boost When Capacity Runs Low
Running out of soft water during a heavy-use weekend is the quickest way to dislike any softener—unless it has a safety net. The SoftPro Elite includes an emergency reserve function: if capacity dips too low, you can trigger a 15-minute quick regeneration to restore enough exchange sites to carry you until the next full cycle.
- This short-cycle refresh is a lifesaver when relatives visit or the washer runs back-to-back loads. It’s not a full clean, but it keeps soft water flowing when it matters. Because the Elite runs a lean reserve (~15%), you maximize usable capacity without risking hard water breakthrough. The self-charging capacitor retains programming and time settings for up to 48 hours during power outages, so your emergency-regen option is always ready.
Arturo used quick regen the Sunday of a family barbecue when laundry and showers stacked up. It took less than half an hour to get them comfortably through the evening—no hard water surprise for Monday morning.
When to Use Quick Regen
Use it if you see gallons remaining near zero before a busy window. It’s the right tool for “one more day” coverage.
Programming Tip
Set accurate hardness, include iron in effective hardness (multiply iron PPM by 3), and let the meter handle the rest.
Key Takeaway
A 15-minute safety net beats cold showers and brittle laundry every time.
#7. Vacation Mode and Sanitary Refresh – Automatic 7-Day Cycle Protects Your System While You’re Away
Stagnant water isn’t your friend. The Elite’s vacation mode triggers an automatic refresh every seven days to move water through the resin and brine lines, helping prevent bacterial growth and stale odors.
- This light maintenance pulse keeps the softener clean without heavy salt usage. When you return, your system is fresh and ready. The controller’s “days since regeneration” log makes it clear when the last refresh occurred—no guessing.
The Okoyes travel to visit family several times a year. Vacation mode meant they no longer wondered, “Is the water going to smell off when we get back?”
Why Movement Matters
Slow turnover encourages biofilm. A brief, periodic flow disrupts that cycle and preserves resin integrity.
Power Outage Peace of Mind
That self-charging capacitor ensures your vacation settings persist through brief power blips.
Key Takeaway
Leave home confident—your softener will maintain itself until you return.
#8. Real Support and Real Warranty – Family-Owned QWT, Lifetime Valve and Tanks, NSF 372 Confidence
Technology is only half the story. The other half is who stands behind it. SoftPro Elite is backed by Quality Water Treatment (QWT)—my family’s company since 1990—with a lifetime warranty on the valve and tanks, and NSF 372 lead-free compliance with IAPMO materials safety validation.
- Warranty coverage you can actually use—no dealer maze, no third-party claims office. Call us, email us, and talk to a real person. Jeremy helps with sizing and water analysis. Heather supports installation and parts. I jump in on complex technical calls. Documentation, parts availability, and a support line with people who know your system matter more than flashy brochures.
Lina told me she chose SoftPro in part because she could put names to the people helping: Jeremy, Heather, and me. That trust shows when questions pop up months later.
Comparison Focus: SoftPro Elite vs. Culligan (Service Dependence and Warranty Access)
Culligan dealers vary by region, and many models are tightly tied to dealer service networks. While local support can be helpful, it can also mean appointment windows, proprietary parts, and limited DIY control. SoftPro’s approach is different: direct access to our family team, standard industry components, and a lifetime warranty on critical components. For the Okoyes, that meant no monthly service obligations, no recurring dealer fees, and the freedom to handle basic maintenance themselves with our guidance. Performance-wise, SoftPro’s upflow regeneration and lean reserve strategy deliver measurable salt and water savings over time compared to many dealer-installed downflow units. Over a 5–10 year horizon, that efficiency plus direct warranty support translates to lower total ownership cost and less hassle—making the Elite worth every single penny.
Independent Safety Assurance
NSF 372 and IAPMO validation mean your wetted components meet strict lead-free and materials safety standards.
Warranty You’ll Actually Use
Lifetime on tanks and valve, robust electronics coverage, and direct claims through QWT ensure long-term confidence.
Key Takeaway
Great engineering paired with reachable people and real warranty terms—this is how water treatment should work.
#9. DIY-Friendly Install Without Drama – Quick-Connects, Real Clearances, and Code-Smart Planning
Plenty of homeowners can install the Elite with basic plumbing skills and a weekend afternoon. The design emphasizes DIY-friendly quick-connect fittings and straightforward layout.
- Plan for an 18" x 24" footprint with 60–72" of overhead clearance for the brine tank. Keep the softener close to your main supply, a floor drain or standpipe, and a GFCI outlet. Standard 3/4" or 1" connections make tie-in simple. If you’re working with PEX, SharkBite or crimp fittings are effective. Copper sweat requires a torch and practice—don’t heat near plastic valve parts. A 1/2" drain line within 20 feet for gravity flow is ideal. Longer runs can use a condensate pump.
Arturo handled his install with PEX and a shutoff/bypass assembly. From water-off to leak check, he spent an afternoon and then watched the initial regeneration while the kids “supervised.”
Pre-Install Checklist
- Verify hardness and iron levels Confirm pressure: 25–80 PSI (use a regulator above 80) Identify a proper drain and protect from backflow per local code
Programming in Minutes
Set time, hardness (include iron), and your household size. The LCD touchpad is straightforward, even in a dim utility room.
Key Takeaway
With planning and patience, most homeowners can install the Elite—saving $300–$600 in labor.
#10. Proven ROI – Salt, Water, Appliance Protection, and 10-Year Ownership Costs That Actually Pencil Out
When you add operating savings to extended appliance life, the Elite pays for itself quickly.
- Purchase: typically $1,200–$2,800 depending on capacity. DIY install saves $300–$600. Annual salt: often $60–$120 with upflow vs. $180–$400 on downflow. Annual water waste: $25–$40 upflow vs. $80–$150 downflow. Resin life: 15–20 years with 8% crosslink resin, replacement $250–$400 when needed. Appliance protection: avoiding early water heater, dishwasher, and washing machine issues can prevent $2,000–$5,000 in costs over a decade.
The Okoyes tracked three months of post-install data: salt use dropped dramatically, and their electric bill for water heating dipped after scale began clearing from the heater element. They also stopped replacing clogged showerheads, which had cost them $120 in little “nicks” the previous year.
Five-Year Snapshot
Total ownership for the Elite commonly lands around $1,800–$3,200 over five years—versus $2,500–$4,500 for many downflow or service-dependent models.
Ten-Year Reality
Expect $1,200–$2,500 in total savings, plus cleaner fixtures, softer laundry, and fewer service calls.
Key Takeaway
Efficiency you can measure, longevity you can count on—that’s a return that feels good every month.
FAQ: Expert Answers from Craig “The Water Guy” Phillips
1) How does SoftPro Elite’s upflow regeneration cut salt use compared to traditional downflow systems?
It cleans the resin more completely with less brine. During regeneration, the Elite sends brine upward through the resin, expanding the bed and increasing contact time. This counter-current path uses brine more effectively—often over 90%—so you need fewer pounds of salt per cycle and less rinse water. Downflow systems commonly burn 6–15 lbs per cleaning and flush 50–80 gallons; the Elite typically needs about 2–4 lbs with 18–30 gallons rinse. Independent testing shows hardness reduction of 99.6%+, so you’re not trading efficiency for performance. The Okoyes went from constant salt runs to refilling much less frequently. My recommendation: if you value lower operating costs without compromise, choose an upflow softener like SoftPro Elite.
2) What grain capacity do I need for a family of four with 18 GPG hard water?
Start with the math: 4 people × 75 gallons/day × 18 GPG = 5,400 grains/day. A 64K Elite typically hits a 6–7 day regeneration interval, which is ideal. A 48K could work but may stretch to 8–9 days without much headroom for guests or iron. For the Okoyes (18 GPG plus 0.8 PPM iron), we chose 64K fine mesh to manage both hardness and iron. Rule of thumb: target a 3–7 day regen cycle, include iron in effective hardness (iron PPM × 3), and size up if you host often or have high-flow fixtures.
3) Can SoftPro Elite handle iron as well as hardness minerals?
Yes—up to 3 PPM of clear-water iron when using fine mesh resin and proper programming. The Elite’s upflow cycle strips iron from the resin before it cements into beads, vastly improving long-term performance. If you’re over 3 PPM, add a dedicated iron system before the softener. The Okoyes saw orange staining disappear after install with 0.8 PPM iron, confirming the Elite’s capability in that range. Always test iron levels first and set the controller using effective hardness to account for iron load.
4) Can I install SoftPro Elite myself, or should I hire a professional?
Many homeowners DIY this install successfully. Plan for an 18" x 24" footprint, 60–72" headroom, a nearby drain/standpipe, and a GFCI outlet. Use 3/4" or 1" connections; PEX with SharkBite/crimp fittings is common for DIY. Keep the bypass valve accessible. The Okoyes completed theirs in an afternoon using PEX and our step-by-step guide. If you’re not comfortable cutting into your main, hire a plumber—expect $300–$600. Either way, Heather’s team at QWT has tutorials and phone support to help.
5) What space and plumbing requirements should I plan for?
Allocate room for the mineral tank and brine tank, keep at least 18" x 24" of https://socialicus.com/story6715579/softpro-elite-the-ultimate-solution-for-city-water floor space, and allow brine-loading clearance. A 1/2" drain line within 20 feet helps ensure proper backwash flow; farther runs may need a condensate pump. Maintain incoming pressure between 25–80 PSI (regulate above 80). Keep the controller’s LCD touchpad visible. Plan plumbing so you can easily isolate the softener using the bypass during maintenance.
6) How often do I need to add salt, and what kind should I use?
Expect to top off every 1–2 months for most households, often less with the Elite’s upflow efficiency. Keep salt 3–6 inches above the water level in the brine tank. Use high-purity solar pellets or evaporated salt to minimize residue; avoid block salt. The Okoyes found their salt use dropped by more than half compared to their old system. If you see a hard crust (salt bridge), break it up and avoid overfilling the tank.
7) What is the lifespan of the resin, and how do I extend it?
SoftPro’s 8% crosslink resin is built for 15–20 years in typical applications. Longevity depends on proper sizing, accurate programming, and good regeneration hygiene. Upflow cleaning prevents channeling and keeps exchange sites open. For wells with iron, fine mesh resin and occasional resin cleaner help. The Okoyes run an annual sanitization and have programmed effective hardness for iron—standard best practices that maximize resin life.
8) What’s the total cost of ownership over 10 years?
With purchase, salt, water, and minimal maintenance, the Elite generally lands in the $2,800–$4,200 range over 10 years—often $1,200–$2,500 less than downflow https://marvindydh589044.tblogz.com/the-premier-water-solution-the-ultimate-solution-for-city-water-52517550 or dealer-dependent systems when you include salt/water waste and service fees. Factor in protected appliances—water heater, dishwasher, washer—and the savings grow. The Okoyes avoided another showerhead replacement already and expect lowered energy costs as heater scale diminishes.
9) How much will I save on salt every year with SoftPro Elite?
Real-world numbers vary by capacity and usage, but shifting from 6–15 lbs of salt per cycle to around 2–4 lbs typically cuts annual salt purchases by hundreds of pounds. For a family like the Okoyes, that translated into fewer store runs and significantly lower spend. Add water savings from shorter rinse volumes, and your yearly operating costs drop further. My take: the Elite’s upflow and lean reserve design are the biggest levers for ongoing savings.
10) How does SoftPro Elite compare to Fleck 5600SXT?
Fleck makes sturdy valves with a long track record. However, many 5600SXT installs use downflow cleaning and larger reserves, which raises salt and water usage. The Elite’s upflow regeneration and metering with ~15% reserve reduce operating costs while maintaining 99.6% hardness removal. The Elite’s smart valve controller provides clearer diagnostics and gallons-remaining data that homeowners love. For the Okoyes, the difference was measured in salt bags not purchased and cycles that ran exactly when needed. If efficiency and long-term ownership cost are priorities, I recommend SoftPro Elite.
11) Is SoftPro Elite better than Culligan if I want less maintenance and fewer service appointments?
If you prefer independence, yes. Many Culligan models rely https://bookmarksystem.com/story21026405/ultimate-water-management-system-the-ultimate-solution-for-city-water on dealer service for setup and upkeep, sometimes with proprietary parts and scheduled visits. SoftPro provides direct support from our family team at Quality Water Treatment, uses standard components, and offers a lifetime warranty on tanks and valve. The Elite’s demand-initiated logic and easy diagnostics mean you control maintenance. The Okoyes wanted fewer appointments and more transparency—SoftPro delivered both. If that’s your goal, choose the Elite.
12) Will SoftPro Elite work if my hardness is extremely high (25+ GPG)?
Absolutely—just size correctly. For 25+ GPG, many households land in the 64K–80K range; larger families or homes with high-flow fixtures may prefer 80K–110K. At extreme hardness, upflow cleaning’s salt and water efficiency become even more valuable. If you have iron above 3 PPM, add dedicated iron filtration before the softener. We’ve installed Elite systems in the Desert Southwest and Mountain West at 25–30+ GPG with strong performance and manageable operating costs.
Conclusion: The Best Water Softener System Isn’t Just About Softer Water—It’s About Smarter Ownership
What wins long term? A system that cleans its resin the right way, regenerates only when needed, preserves your water pressure, and gives you control without the dealer maze. The SoftPro Elite checks every box: efficient upflow regeneration, demand-initiated metering, 15 GPM whole-home flow, iron handling up to 3 PPM, real diagnostics, vacation safeguards, and a lifetime-backed warranty from a family that answers the phone. For the Okoyes, it ended the cycle of constant salt hauling, costly little fixes, and scratchy laundry. For you, it’s a reliable path to lower operating costs and better living—with performance that’s worth every single penny.
If you want expert sizing for your home, call Jeremy. For install guidance, Heather’s tutorials are ready. And if you like to geek out on optimization, I’m your guy. We built SoftPro to transform water—and make your home easier to love, every single day.